Calibrating Elite Trainers and Spin Downs
Unfortunately, there is no such thing as a Spin Down calibration for Elite trainers. They do not operate like other trainers. Elite flashes a base map to all of the trainers and that base map can only be adjusted using the Elite My E-Training App. You will need to download the Elite App and use a power meter to properly calibrate your trainer. This is done by adjusting what is called the "P1, P2, and P3" values. For more information, you can read this article here, Elite Qubo Spin Down Calibration or review this article Elite Rampa Review, The Calibration.
The image above is what you will see when you have finished calibrating your P values within the Elite App. However, each trainer has its own set of P values. The ones displayed above are the default values that come with the Elite Qubo Digital Smart B+ trainer.
Not Hitting Lower Wattage Targets in ERG Mode
The minions are asked about this quite a bit at Sufferlandrian Services. The rider has a recovery wattage of 125 watts. However, their trainer won't go below 150 watts. What is going on? We will show you exactly what is going on. Below is an image of the minimum power output for the Elite Qubo Digital Smart B+ (wheel on budget smart trainer).
The red line is your minimum wattage for the maximum wheel speed. For instance, your recovery period is set to be 125 watts. However, your trainer won't go below 150 watts. That means your wheel speed is most likely 45kph and you won't get below 150watts. Sufferlandrians will need to shift up (make it easier) a few gears to lower wheel speed. That will allow you to hit the lower wattage numbers during your recovery period. Consider that red line your wattage basement that you cannot go below.
Misuro B+ Sensor
Check out this video for help setting up your Misuro B+ sensor
Check For Firmware Updates
The last thing we will talk about is firmware updates. Go to the Elite My E-Training App and just check to see that you have the latest firmware. Simple as that.
Below are common problems that users have connecting Elite Trainers. Click on the problem that you are having to go into that troubleshooting article.
- ANT+ Dongle Not Being Detected or no FE-C trainer?
- ERG Mode Not Working For You?
- Sensors Keep Dropping Out/Losing Connection?
- Speed and Distance Calculations are off?