On 15 May we'll be releasing a new version of The Sufferfest app for iOS. With that release, you will no longer be able to connect your ANT+ devices directly to The Sufferfest app on your iPad or iPhone (ANT+ will still be supported on MacOS and Windows with a USB Ant+ dongle).
With less than 3% of Sufferlandrians using ANT+ on iOS—and Apple no longer making the required adapter for the Wahoo ANT+ key—we decided to sunset support so we could devote more development resources to further improving your app experience.
Who Will This Affect?
If you have any of the devices listed in the table below you will need to use an Ant+ to Bluetooth bridge to convert the Ant+ signal into a Bluetooth signal that The Sufferfest app can use.
|Heart Rate Monitors||Speed & Cadence Sensors||Power Meters||Smart Trainers|
Garmin Ant+ HR Straps*
(Older) Quarq Power Meters
|BKool Smart Trainers|
Garmin Hub Mounted Speed Pod
|Garmin Vector 1|
|Garmin Hub Mounted Cadence Pod||Garmin Vector 2|
|(Older)Bontrager Duotrap Sensors**||Garmin Vector 2s|
|Wahoo TICKR Run***||Pioneer Power Meters|
|(Older) PowerTap Hub Power Meters|
|(Newer)SRM Power Meters******|
|Rotor Power Meters|
* Newer Garmin heart rate straps like the Tri and HRM-Dual support Bluetooth. The older models that only have the Ant+ symbol on the back are the ones that will require an Ant+ to Bluetooth bridge
** Newer Bontrager sensors transmit using Bluetooth
*** The regular TICKR and TICKRX work transmit using Bluetooth, this is just the older Run model
**** The P1 transmits with Bluetooth but currently only displays one pedal's power so connecting with Ant+ is required for proper power readings in The Sufferfest app.
***** Older (pre-2016) SRM power meters are not supported at all. Newer models (post-2016) will transmit using Ant+ but still require an Ant+ to Bluetooth bridge.
My Sensor Isn't Listed...
We tried to catch the most common Ant+ only sensors in the above table, but there is a chance that your sensor is Ant+ only and not listed here. The best way to tell is to check the back of your sensor. You are looking for two different symbols, one for Ant+ and the other for Bluetooth.
If you only see the Ant+ symbol on the back of your sensor then you will need to use an Ant+ to Bluetooth bridge to connect that device to The Sufferfest app on iOS. If you see both symbols, you don't need any additional hardware to connect that device.
So I Have An Ant+ Only Sensor; Now What?
Okay, so you've identified the Ant+ only device that you want to connect. Remember that you can still connect them to the app on MacOS or Windows using an ANT+ USB dongle. If you only have iOS, there are a couple of really nice options for connecting your devices to The Sufferfest app.
The cable is a stand-alone device that converts Ant+ signals to Bluetooth signals that The Sufferfest app can receive. Need help configuring your CABLE? Check out this help article for instructions on doing just that.
- Go to the North Pole Engineering webstore
- Use code SUFFERSALE to get 20% off the CABLE ANT+ to Bluetooth bridge.
- Offer must be redeemed by 31 May 2019.
The Viiiiva Heart Rate Strap
The Viiiiva is a heart rate monitor that also acts as a bridge to convert Ant+ to Bluetooth. Check out this help article for Viiiiva setup steps.
- Go to the 4iiii Innovations webstore.
- Use code 4iiiiSufferfest (the code is case sensitive) to get 10% off the Viiiiva heart rate monitor, which can act as an ANT+ to Bluetooth bridge.
- Offer must be redeemed by 31 December 2019.
I've Got The Bridge; How Do I Connect Everything?
You can read a bit more on how to connect your Ant+ devices to The Sufferfest app in our Connecting Ant+ Devices help article.
Still Need Help?
If you are still having trouble sorting through all of this information please email us at email@example.com so that we have help