Connecting The Favero Assioma DUO Power Meter

Follow

In order to use the Assioma DUO Power Meter you will need the Favero Assioma App installed on your phone or tablet.

Below are the steps that you will need to follow to connect both sides (both pedals) to The Sufferfest app.  The pictures below show an Ant+ connection but the Bluetooth connection process is identical.

Setting Up The Assioma DUO in the Favero Assioma App

Make sure that your Assioma DUO Pedals are powered on and awake.  Choose the magnifying glass in the top right of the app screen to discover your pedals.

2_Magnifying_Glass.png

The pedals should be detected.  You may see one connect as an UNO initially followed by the other showing up as an UNO as well.  We will set them up as a DUO in the following steps.

5_Right_Pedal_Discovered.png

Once your pedals are both discovered choose the settings button at the bottom of the app screen.  You will now see the settings menu.  This is where we will turn the two UNO pedals into one DUO system.  Select the "Convert Assioma UNO into Assioma Duo Option.

6_Settings-Conversion_Screen.png

Once you select the above option you will be prompted to confirm the conversion.

7_Convert_UNO-to-DUO.png

On the next screen you will choose "ASSOCIATE" to connect the right and left pedals.

8_Associate_UNO-to-DUO-2.png

Now their joining is complete.  From now on you will see the pedals as a DUO setup until you unpair them.

9_Paired_Success.png

Now pair the Assioma Duo with The Sufferfest app following the steps in the Device Connections help article.

1 out of 1 found this helpful

Comments

0 comments

Article is closed for comments.